38mm Mini Mesh Decking Specification
The 38mm mini mesh panel has a 12mm × 12mm internal mesh and is supplied with a gritted surface finish. Available panel sizes are 4m × 1m and 3m × 1m, with a stated weight of 24.5kg/m².
The smaller mesh opening provides a more enclosed walking surface than standard open mesh grating and is used for pedestrian applications including pontoons, marina fingers, jetties, gangways and walkways.
38mm Decking (Internal mesh size 12mm x 12mm) |
|||||
|---|---|---|---|---|---|
| Panel Depth | Panel Size | Actual Size – mm | Panel Weight Kg | Weight – Kg/m2 | Surface Finish |
| 38mm | 4m x 1m | 4007 x 1007 | 98 | 24.5 | Gritted |
| 38mm | 3m x 1m | 3007 x 1007 | 73.5 | 24.5 | Gritted |
Typical Applications
- Pontoons
- Marina fingers
- Jetties
- Gangways
- Piers
- Pedestrian walkways
- Roof access
- Decking and access areas
Product Characteristics
- 38mm panel depth
- 12mm × 12mm internal mesh
- Gritted surface finish
- 24.5kg/m² panel weight
- Corrosion-resistant GRP construction
- Does not rot or splinter
- Low maintenance
- Cutting and fabrication available
38MM MINI MESH GRP DECKING FAQs
Panel depth should be selected according to the required loading, support span and supporting structure rather than depth alone. The relevant load and span data should be checked against the requirements of the installation before the panel is specified.
The appropriate panel depth depends on the required loading, support span and installation arrangement. The 30mm and 38mm panels have different physical specifications, but panel depth alone should not be used to determine suitability. The relevant load and span data should be checked before either panel is specified.
Support centres should be determined from the required loading and the relevant load/span data for the panel. The supporting structure and fixing arrangement should also be considered when determining the installation layout.
The fixing arrangement depends on the supporting structure and installation requirements. Stainless steel fixings are available for securing 38mm mini mesh decking, with the appropriate fixing selected to suit the panel and supporting structure.
Yes. 38mm mini mesh decking can be cut and fabricated to suit individual project requirements, including specific panel dimensions and openings around existing structures. Panels can be prepared to the required dimensions before supply based on the measurements and installation details provided.
Potentially, yes, provided the existing structure is suitable for the proposed installation. The condition of the supporting structure, support centres, required loading and fixing arrangement should be assessed before the panels are specified.
38mm mini mesh can be used as replacement decking where the existing supporting structure and installation requirements are suitable. Support centres, required loading, panel arrangement and the proposed fixing method should be checked before replacement panels are specified.
Provide the required panel dimensions together with details of any cut-outs, openings or other fabrication requirements. Information about the supporting structure and installation can also help determine the appropriate panel and fixing arrangement.
Need technical advice or specifications? Our GRP specialists are happy to help.