30mm Mini Mesh Decking Specification
The 30mm mini mesh panel has a 12mm × 12mm internal mesh and is supplied with a gritted surface finish. Available panel sizes include 4m × 1.2m and 3m × 1m, with the stated weights shown in the specification table below.
The smaller mesh opening provides a more enclosed walking surface than standard open mesh grating and is used for pedestrian applications including pontoons, marina fingers, jetties, gangways and walkways.
30mm Decking (Internal mesh size 12mm x 12mm) |
|||||
|---|---|---|---|---|---|
| Panel Depth | Panel Size | Actual Size – mm | Panel Weight Kg | Weight – Kg/m2 | Surface Finish |
| 30mm | 4m x 1.2m | 4047 x 1527 | 78 | 13 | Gritted |
| 30mm | 4m x 1.2m | 4047 x 1247 | 92.4 | 18.5 | Gritted |
| 30mm | 3m x 1m | 3007 x 1007 | 55.5 | 18.5 | Gritted |
Typical Applications
- Pontoons
- Marina fingers
- Jetties
- Gangways
- Piers
- Pedestrian walkways
- Roof access
- Decking and access areas
Product Characteristics
- 30mm panel depth
- 12mm × 12mm internal mesh
- Gritted surface finish
- Corrosion-resistant GRP construction
- Does not rot or splinter
- Low maintenance
- Available in multiple panel sizes
- Cutting and fabrication available
30MM MINI MESH GRP DECKING FAQs
Panel depth should be selected according to the required loading, support span and supporting structure rather than depth alone. The relevant load and span data should be checked against the requirements of the installation before the panel is specified.
Both products use a 12mm × 12mm internal mesh and gritted surface, but they have different panel depths and physical specifications. The appropriate panel should be selected according to the loading, support span and installation requirements rather than assuming that one depth is suitable for every application.
The support centres should be determined from the required loading and the relevant load/span data for the panel. The supporting structure and fixing arrangement also need to be considered when determining how the grating will be installed.
The fixing arrangement depends on the supporting structure and installation requirements. Stainless steel fixings are available for securing 30mm mini mesh decking, with the appropriate fixing selected to suit the panel and supporting structure.
Yes. 30mm mini mesh decking can be cut and fabricated to suit individual project requirements, including specific panel dimensions and openings around existing structures. Panels can be prepared to the required dimensions before supply based on the measurements and installation details provided.
Potentially, yes, provided the existing structure is suitable for the proposed installation. The condition of the supporting structure, support centres, required loading and fixing arrangement should be assessed before the panels are specified.
30mm mini mesh can be used as replacement decking where the existing supporting structure and installation requirements are suitable. Support centres, required loading, panel arrangement and the proposed fixing method should be checked before replacement panels are specified.
Provide the required panel dimensions together with details of any cut-outs, openings or other fabrication requirements. Information about the supporting structure and installation can also help determine the appropriate panel and fixing arrangement.
Need technical advice or specifications? Our GRP specialists are happy to help.