22mm Mini Mesh Decking Specification
The 22mm mini mesh panel has a 12mm × 12mm internal mesh and is supplied with a gritted surface finish. Panel sizes include 4m × 1.5m, 4m × 1.2m, 3m × 1m and 2m × 1.5m, with a stated weight of 13kg/m².
The smaller mesh opening provides a more enclosed walking surface than standard open mesh grating, making the 22mm panel suitable for pedestrian areas including pontoons, marina fingers, jetties, gangways and walkways.
22mm Decking (Internal mesh size 12mm x 12mm) |
|||||
|---|---|---|---|---|---|
| Panel Depth | Panel Size | Actual Size – mm | Panel Weight Kg | Weight – Kg/m2 | Surface Finish |
| 22mm | 4m x 1.5m | 4047 x 1527 | 78 | 13 | Gritted |
| 22mm | 4m x 1.2m | 4047 x 1247 | 65 | 13 | Gritted |
| 22mm | 3m x 1m | 3007 x 1007 | 39 | 13 | Gritted |
| 22mm | 2m x 1.5m | 1997 x 1527 | 39 | 13 | Gritted |
Typical Applications
- Pontoons
- Marina fingers
- Jetties
- Gangways
- Piers
- Pedestrian walkways
- Roof access
- Decking and access areas
Product Characteristics
- 22mm panel depth
- 12mm × 12mm internal mesh
- Gritted surface finish
- Corrosion-resistant GRP construction
- 13kg/m² panel weight
- Does not rot or splinter
- Low maintenance
- Available in multiple panel sizes
22MM MINI MESH GRP DECKING FAQs
22mm mini mesh GRP decking is available in 4m × 1.5m, 4m × 1.2m, 3m × 1m and 2m × 1.5m nominal panel sizes. The actual panel dimensions are shown in the product specification table above.
The 22mm mini mesh grating has a stated weight of 13kg/m². Individual panel weights vary according to panel size, from 39kg for the smaller panels up to 78kg for the 4m × 1.5m panel.
The 22mm panel has a 12mm × 12mm internal mesh. This creates a more enclosed surface than standard open mesh grating and is suited to pedestrian access applications.
The main differences are the panel depth and weight. The 22mm mini mesh has a stated weight of 13kg/m², compared with 9.5kg/m² for the 14mm panel. Both use a 12mm × 12mm internal mesh and gritted surface. Panel selection should take account of the required loading and support span for the installation.
The fixing arrangement depends on the supporting structure and installation requirements. Stainless steel fixings are available for securing 22mm mini mesh decking, with the appropriate fixing selected to suit the panel and supporting structure.
Yes. 22mm mini mesh decking can be cut and fabricated to suit individual project requirements, including specific panel dimensions and openings around existing structures. Panels can be fabricated to the required dimensions before supply, based on the measurements and installation details provided.
The 12mm × 12mm internal mesh provides a more enclosed surface than standard open mesh grating, which can make mini mesh suitable for areas used by wheelchairs, trolleys and other wheeled equipment. Suitability should be considered as part of the complete installation, including loading, support spans, gradients and transitions.
22mm mini mesh can be used to replace timber decking where the existing supporting structure is suitable. Support centres, required loading and the fixing arrangement should be checked before replacement panels are specified.
Need technical advice or specifications? Our GRP specialists are happy to help.